 |
LED > Cliptonic Programmable Flashing Uplights Cliptonic allows any group of Modular International Inc uplight to flash simultaneously. They can be programmed to give different timing. The group can be fed from a 120/24 volt DC mains supply or alternatively, from stand-alone batteries which give a very long life between servicing intervals. This system is designed to give highly visible flashing lights in sensitive areas such as roundabouts, dangerous bends, crossroads, etc. These flashing uplights can be used in an urban environment as well as a rural one, due to their adaptability in supply. They can be used with 120 volt in cities and towns or alternatively, they can be fitted with a stand alone 24 volt DC battery giving 6-8 months service interval. |
|
Home | Search Agents |
Pressroom Literature | Events | Contact Us |
|
Details Temperature operating range: -20°C, +80°C. Maximum numbers of uplights in series: 75 Supply voltage: (DC) same as secondary of transformer. Synchronization Cable: 2 core armored cable with 2 conductors (lower than 13/64" Ø). Maximum 70 LEDs an uplight. Flash duration: 100 milliseconds Time interval variation: 0 to 4 seconds in increments of 250 milliseconds Resetting: 5 minutes after iterruption. Data To = (0,4 s) M = Master E = Slave If To = 0, no interval between the uplights. 
|
|
