Linears® Recessed Trimless Three Mixed Lamp

ML2-LED/16 – 1-LED/LINEAR-TI-REC-TL

Modular Multiples® Linears® Series, two 16 watt LED lamps / one linear LED lamp, black housing, driver incorporated, rectangular aperture, trimless configuration shown. Other configurations available. (patent #6,234,644)

Made to your specifications!

Additional Details

See tabbed information below or download the PDF.

 

Downloads

Share this Fixture 

Configurations

  • Lamps spaced 6” on center or greater
  • Lamp size determines minimum width, maximum width is unrestricted
  • Articulated arms (optional) increase flexibility of orientation or hide lamp source
  • Available in symmetric and asymmetric configurations
  • Uses all LED modules and legacy lamp sources

Housing

  • Extruded aluminum profile with a series of internal steel plates – single lengths up to 10’
  • Connection hardware available for joining multiple pieces to make longer continual lengths
  • Available with extruded aluminum trim or trimless housing with spackle flange
  •  90° and 45° corner sections available

Finishes

  • Powder coated – white or black standard
  • Custom colors available

Electrical

  • Internal electronic power supply(s) / transformer(s) / ballast(s) accessible through the aperture of the fi xture
  • Dimmable (not applicable on HID products)
  • One power supply / transformer per lamp allowing for multi-circuit wiring
  • 120v and 277v available
  • Listed to UL1598 standards

Mounting

  • Fixture is designed to be supported from above with 3/8” (9mm) all-thread rods.
  • Access plates for all thread attachment are positioned throughout the fixture body based on fixture length and lamp spacing allowing for access from below.
  • In addition to the all thread rods, the Trimless models have a spackle flange that will allow for fixture to be secured to surrounding ceiling or wall structure via screws and flange covered with spackling compound for a smooth finished appearance.

Options

  • Patented die-cast aluminum ring sets and locking devices
  • Pull down yokes
  • Shielding cones
  • Filter media
    • LED modules accept one 1/8″ thick filter
    • LED direct replacement and legacy lamps accept up to two 1/8″ thick filters

Download PDF for fixture option details


Lamping

Standard LED Modules:

  • LED-513-6 (13 watt 6º – 623 lumens, 25,350 candela @ 350mA 2700ºK 95CRI)
  • LED-513-12 (13 watt 12º – 598 lumens, 7,740 candela @ 350mA 2700ºK 95CRI)
  • LED-513-22 (13 watt 22º – 630 lumens, 3,377 candela @ 350mA 2700ºK 95CRI)
  • LED-708-6 (8 watt 6º – 465 lumens 26,650 candela @ 500mA 2700ºK 95CRI)
  • LED-708-12 (8 watt 12º – 626 lumens 10,735 candela @ 500mA 2700ºK 95CRI)
  • LED-708-22 (8 watt 22º – 613 lumens 3,572 candela @ 500mA 2700ºK 95CRI)
  • LED-716-12 (16 watt 12º – 1047 lumens 18,901 candela @ 1050mA 2700ºK 95CRI)
  • LED-716-22 (16 watt 22º – 1043 lumens 6,604 candela @ 1050mA 2700ºK 95CRI)
  • LED-716-45 (16 watt 45º – 980 lumens 1,434 candela @ 350mA 2700ºK 97CRI)
  • LED-720-12 (20 watt 12º – 1054 lumens 9,343 candela @ 500mA 2700ºK 97CRI)
  • LED-720-22 (20 watt 22º – 1040 lumens 6,587 candela @ 500mA 2700ºK 97CRI)
  • LED-720-45 (20 watt 45º – 1033 lumens 1,728 candela @ 500mA 2700ºK 97CRI)

 

Direct Replacement LED or Legacy Lamps:

  • -BLD (MR16 LED)
  • -B (MR16 HALOGEN)
  • -BH (MR16 CMH)
  • -DLD (AR111 LED)
  • -D (AR111 HALOGEN)
  • -S (CDMR111)
  • -GLD (PAR30 LED)
  • -G (PAR30)
  • -H (PAR30 HID)
  • -JLD (PAR38 LED)
  • -J (PAR38)
  • -K (PAR38 HID)
ML2-LED/16 - 1-LED/LINEAR-TI-REC-TL

Modular Multiples® Linears® Series, two 16 watt LED lamps / one linear LED lamp, black housing, driver incorporated, rectangular aperture, trimless configuration shown. Other configurations available. (patent #6,234,644)

Standard LED Modules
LAMPS and DIMENSIONSABCDEFGH
LED16 / LED513 / MR16LED / MR16 / LINEAR LED3"
76mm
4-1/4"
108mm
7-1/2"
191mm
8-1/2"
216mm
36"
914mm
7"
178mm
8"
381mm
45-5/16"
1151mm