Trimless Series

Recessed Fixtures featuring Housings Flush with the Ceiling

Distinctive Appearance for Branded Lighting Experiences

Perforated flange around housing facilitates plastering flush with ceiling system, leaving an attractive trimless aperture. Fixtures feature a removable plate inside the housing, held in place with screws, providing access to the power supplies/transformer. Fixtures must be installed with or prior to the ceiling system.

Series Brochure

Download our brochure that provides more detail.

Download

Tech Specs

Recessed Fixtures for New Work / Old Work Installations

Configurations

  • 1, 2, 3, 4 light units standard
  • Custom configurations available

Housing

Fabricated 18 gauge steel housing with perforated spackle flange

Finishes

  • Housing and ring sets powder coated – white or black standard
  • Custom colors available
  • Stainless steel / satin nickel available

Electrical

  • Internal electronic power supply(s) / transformer(s) / ballast(s)
  • Dimmable (not applicable on HID products)
  • One power supply / transformer per lamp allowing for multi-circuit wiring.
  • 120v and 277v available
  • Listed to UL1598 standards

Lamping

Standard LED Modules

LED-513-613 watt 6º623 lumens 25,350 candela @ 350mA 2700ºK 95CRI
LED-513-1213 watt 12°598 lumens 7,740 candela @ 350mA 2700ºK 95CRI
LED-513-2213 watt 22°630 lumens 3,377 candela @ 350mA 2700ºK 95CRI
LED-708-68 watt 6º465 lumens 26,650 candela @ 500mA 2700ºK 95CRI
LED-708-128 watt 12º626 lumens 10,735 candela @ 500mA 2700ºK 95CRI
LED-708-228 watt 22º613 lumens 3,572 candela @ 500mA 2700ºK 95CRI
LED-716-1216 watt 12º1047 lumens 18,901 candela @ 1050mA 2700ºK 95CRI
LED-716-2216 watt 22º1043 lumens 6,604 candela @ 1050mA 2700ºK 95CRI
LED-716-4516 watt 45º980 lumens 1,434 candela @ 350mA 2700ºK 97CRI
LED-720-1220 watt 12º1054 lumens 9,343 candela @ 500mA 2700ºK 97CRI
LED-720-2220 watt 22º1040 lumens 6,587 candela @ 500mA 2700ºK 97CRI
LED-720-4520 watt 45º1033 lumens 1,728 candela @ 500mA 2700ºK 97CRI

Direct ReplacementLED  or Legacy Lamps:

-BLDMR16 LED
-BMR16 HALOGEN
-BHMR16 CMH
-DLDAR111 LED
-DAR111 HALOGEN
-SCDMR111
-GLDPAR30 LED
-GPAR30
-HPAR30 HID
-JLDPAR38 LED
-JPAR38
-KPAR38 HID

Mounting

NEW WORK (TI):

  • For new construction applications.
  • Recessed housing is installed via adjustable universal mounting brackets and bar hangers prior to the installation of drywall.
  • Once drywall is installed, the Trimless Mounting Frame is secured to the housing.
  • Spackling compound is applied over the perforated flange and finished for a smooth finished appearance.

OLD WORK (TA):

  • For applications where ceilings are currently installed.
  • An opening is cut into the ceiling material to fit the Trimless Mounting Frame. The Trimless Mounting Frame is secured to the ceiling or wall structure with the appropriate hardware.
  • Spackling compound is applied over the perforated flange and finished for a smooth finished appearance. Fixture wiring connections are made and fixture is inserted through the installed frame and sat in place on top of the frame and secured with provided hardware

Options

  • Patented die-cast aluminum ring sets and locking devices
  • Pull down yokes
  • Shielding cones
  • Filter media
    • LED modules accept one 1/8″ thick filter
    • LED direct replacement and legacy lamps accept up to two 1/8″ thick filters
Trimless standard configurations

Learn how our lighting solutions could be a perfect fit for your project.


Contact Us Today